Genuine Royal Enfield speedo drive assembly, part number 1040741/A. Known to most mechanics as the speedo machine or meter pinion, this is the geared unit at the front wheel that drives the speedometer cable. A jumping or lazy needle is nearly always this part rather than the clock itself, and a worn one is usually down to water getting past the seals. UK stock, dispatched from Bolton.
Product Details
Genuine Royal Enfield speedo drive assembly
Part number: 1040741/A, also listed as 144571/B on some older UCE kits
Factory calibrated gear set for accurate speed and odometer readings
Reinforced PVC and heat treated steel construction
Internal dust and moisture seals to prevent gear seizure
Direct fit, slides onto the front axle and mates to the standard speedo cable
Black and grey finish
Compatible with the full UCE range
Country of origin: India
Condition: New
UK stock, dispatched from Bolton
Fitment Information
Fits Royal Enfield Classic 350 and 500 (UCE), Bullet 350 and 500 (UCE), Bullet Electra (UCE), Bullet Trials 350 and 500, and Continental GT 535. Not compatible with the newer J Series models such as the Classic Reborn and Meteor, which use an electronic speed sensor instead. Please check your existing part number against 1040741/A before ordering. If you are unsure, message us before purchasing and we will confirm.
Delivery & Returns
Dispatched within 1 to 2 business days. UK delivery 7 to 10 working days via tracked service. Returns accepted within 14 days for damaged, faulty, or incorrect items, subject to our returns policy. Please contact us first.
Sold by Gutsy Bear Moto Spares Ltd, Company No. 17162660
Genuine Royal Enfield speedo drive assembly, part number 1040741/A. Known to most mechanics as the speedo machine or meter pinion, this is the geared unit at the front wheel that drives the speedometer cable. A jumping or lazy needle is nearly always this part rather than the clock itself, and a worn one is usually down to water getting past the seals. UK stock, dispatched from Bolton.
Product Details
Genuine Royal Enfield speedo drive assembly
Part number: 1040741/A, also listed as 144571/B on some older UCE kits
Factory calibrated gear set for accurate speed and odometer readings
Reinforced PVC and heat treated steel construction
Internal dust and moisture seals to prevent gear seizure
Direct fit, slides onto the front axle and mates to the standard speedo cable
Black and grey finish
Compatible with the full UCE range
Country of origin: India
Condition: New
UK stock, dispatched from Bolton
Fitment Information
Fits Royal Enfield Classic 350 and 500 (UCE), Bullet 350 and 500 (UCE), Bullet Electra (UCE), Bullet Trials 350 and 500, and Continental GT 535. Not compatible with the newer J Series models such as the Classic Reborn and Meteor, which use an electronic speed sensor instead. Please check your existing part number against 1040741/A before ordering. If you are unsure, message us before purchasing and we will confirm.
Delivery & Returns
Dispatched within 1 to 2 business days. UK delivery 7 to 10 working days via tracked service. Returns accepted within 14 days for damaged, faulty, or incorrect items, subject to our returns policy. Please contact us first.
Sold by Gutsy Bear Moto Spares Ltd, Company No. 17162660