Genuine Royal Enfield oil pump spindle, part number 140040/G, replacing the earlier 140040. Hardened steel shaft that drives the oil pump, and a worn one means falling oil pressure, a noisier top end, and an engine running hotter than it should. Cheap insurance to fit during an overhaul rather than find out the hard way. UK stock, dispatched from Bolton.
Product Details
Genuine Royal Enfield oil pump spindle
Part number: 140040/G, replaces earlier part 140040
Hardened alloy steel with protective coating
Machined to factory tolerances for correct alignment with the oil pump worm gear and plungers
Fits into the timing cover assembly
Approximate weight: 300g
Country of origin: India
Condition: New
UK stock, dispatched from Bolton
Fitment Information
Fits pre UCE Royal Enfield models, approximately 1980 to 2009: Bullet 350 Standard, Deluxe, G2 and B1, Bullet 500 cast iron, Electra 4S and 5S in both kick start and electric start, and Machismo 350 and 500. Not compatible with UCE engines such as the Classic 350 and 500, or with J Series engines. Please check your existing part number against 140040/G or 140040 before ordering. If you are unsure, message us before purchasing and we will confirm.
Important Information
This is an internal engine component within the lubrication system. We recommend installation by a qualified motorcycle technician, ideally during a timing cover strip or engine overhaul.
Delivery & Returns
Dispatched within 1 to 2 business days. UK delivery 7 to 10 working days via tracked service. Returns accepted within 14 days for damaged, faulty, or incorrect items, subject to our returns policy. Please contact us first.
Sold by Gutsy Bear Moto Spares Ltd, Company No. 17162660
Genuine Royal Enfield oil pump spindle, part number 140040/G, replacing the earlier 140040. Hardened steel shaft that drives the oil pump, and a worn one means falling oil pressure, a noisier top end, and an engine running hotter than it should. Cheap insurance to fit during an overhaul rather than find out the hard way. UK stock, dispatched from Bolton.
Product Details
Genuine Royal Enfield oil pump spindle
Part number: 140040/G, replaces earlier part 140040
Hardened alloy steel with protective coating
Machined to factory tolerances for correct alignment with the oil pump worm gear and plungers
Fits into the timing cover assembly
Approximate weight: 300g
Country of origin: India
Condition: New
UK stock, dispatched from Bolton
Fitment Information
Fits pre UCE Royal Enfield models, approximately 1980 to 2009: Bullet 350 Standard, Deluxe, G2 and B1, Bullet 500 cast iron, Electra 4S and 5S in both kick start and electric start, and Machismo 350 and 500. Not compatible with UCE engines such as the Classic 350 and 500, or with J Series engines. Please check your existing part number against 140040/G or 140040 before ordering. If you are unsure, message us before purchasing and we will confirm.
Important Information
This is an internal engine component within the lubrication system. We recommend installation by a qualified motorcycle technician, ideally during a timing cover strip or engine overhaul.
Delivery & Returns
Dispatched within 1 to 2 business days. UK delivery 7 to 10 working days via tracked service. Returns accepted within 14 days for damaged, faulty, or incorrect items, subject to our returns policy. Please contact us first.
Sold by Gutsy Bear Moto Spares Ltd, Company No. 17162660